Dr. Dattatraya V Bhise

PHD. in Mechanical Engineering, Sant Gadge Baba Amravati University, 2018

M.Tech in Advanced Production Systems, RGPV Bhopal, 2003

B.Tech in Production Engineering, Sant Gadge Baba Amravati University, 1997

Lecturer N. College of Engineering, Pusad, 4 yrs

Assistant Professor, School of Engineering & Applied Sciences, Rai University New Delhi, 2 Yrs.

Assistant Professor, Amity School of Engineering & Technology, Amity University Noida, 5 yrs.

Associate Professor, Dronacharya Group of Institutions, Greater Noida, 9 Yrs.

Associate Professor , JSPM Narhe Technical Campus Pune, 4 Yrs

Associate Professor, JSPM University, 2023 to Present

Operations/ Manufacturing Management Advanced Manufacturing Technologies, Organizational Transformation Strategic Management

Technology Investment Decision Process: Classification of the Issues, National conference on Trends and Advances in Mechanical Engineering, YMCA Faridabad, 2006

Adoption of Advanced Manufacturing Technologies in Small and Medium Enterprises, International conference on Production and Industrial engineering , NIT Jalandhar, 2007

Design and Development of Labourer Load Reducer, International Science Festival, IIT Delhi, 2012

Defect Minimization by using problems solving tools: A Case Study, International Journal of Engineering Sciences and Management, 2012

Application of MADM Using AHP for the Justification of Material and Process Selection, International Journal of Engineering Sciences and Management, 2013

Attaining Manufacturing Sustainability through Cycle Time Reduction: A Case Study, International Journal of Applied Engineering Research, 2014

Implementation of Advanced Manufacturing in Small and Medium Sized Enterprises: An Empirical Study, Industrial Engineering (ICIE-2015) & 57th National Convention of Indian Institution of Industrial Engineering, SVNIT Surat, 2015

Developing Theoretical Framework for the Effective Implementation of Industry Academia Collaboration, Challenges & Opportunities in Technical Education in the era of sustainable development, 45th ISTE Annual National Convention and International Conference, 2016 \

Developing Theoretical Framework for the Implementation of Advanced Manufacturing Technologies in Small and Medium- sized Enterprises, International Journal of Applied Management and Technology, 2019

Design and Modification of Cam Operated Spring-less Valve System in IC Engine, IOSR Journal of Engineering, 2019

Smart AI-Based Online Proctoring, Journal of the Gujarat Research Society, 2019

A comparative study on Utilization and Benefits of Wireless Mobile Networks, Journal of the Gujarat Research Society, 2019

Modelling the Critical Success Factors for Advanced Manufacturing Technology Implementation in Small and Medium Sized Enterprises, 3C Empresa, 2022

Optimal Reservoir Operation Policy Determination for Uncertainty Conditions, 3C Empresa, 2022

An insight into conversion of internal combustion engine (ICE) vehicle to electric vehicle for green transportation technology, Multidisciplinary Science Journal, 2023

Assimilation of advanced manufacturing technologies in small and medium sized enterprises: an empirical analysis, Multidisciplinary Science Journal, 2023

CFD Analysis of a Butterfly Valve to Optimize its Design, AIP Publishing, 2023

Thermal Analysis of Lithium-Ion Battery for Radial and Axial Heat Dissipation, SSRG-International Journal of Mechanical Engineering, 2023

Received Best Faculty Award with a cash prize of Rs. 51000/- during the year 2013 - Dronacharya Group of Institutions, Greater Noida

Life member of Indian Society for Technical Education (ISTE) (Membership No.77029) • Member of IEEE (Membership No 93717895) Life member of Indian Institution of Industrial Engineering (IIIE) Life member of Center for Education Growth and Research (CEGR)

Manufacturing Technology Automation and Robotics Computer aided Manufacturing Production Management Total Quality Management Production Planning & Control Machine Tool Design Metrology & Quality Control Reliability Engineering Operations Management CAD/CAM Supply Chain Management International Logistics

Coordinator, A Four Week AICTE approved FDP by IIT Bombay on - Use of ICT in Education for Online and Blended Learning, conducted by IIT Bombay under NMEICT program from May 2, 2016 to July 10, 2016.

Coordinator, AICTE and ISTE sponsored Two Week Faculty Development Program on “Introduction to Finite Element Analysis”, at DGI Greater Noida during May 2 -16, 2015.

Coordinator, One Week ISTE Workshop on Fluid Mechanics conducted by IIT Kharagpur, May 20 -27, 2014 through NMEICT .

Coordinator, One Week Workshop on “Instructional delivery and student evaluation" Conducted by NITTTR Chandigarh at DGI Greater Noida 16 – 20, November 2015.

PROFESSIONAL CERTIFICATIONS (NPTEL)

AICTE TRAINING & LEARNING (ATAL)

FDP/STTP ATTENDED

1. Participated in one week FDP on “Outcome based education: A step towards Excellence” from May 11-15, 2020 under Margdarshan Scheme of AICTE, New Delhi organized by Government College of Engineering, Karad.

2. Participated in one week Online Short Term Training Program on Renewable Energy and Utilization May 26 – 30, 2020 at Sandip Institute of Engineering and Management, Nashik.

3. Participated in a one week online workshop on “Digital Transformation & Pedagogies” sponsored by AICTE & TEQIP III during August 10-14, 2020 at Walchand College of Engineering Sangli.

4. Attended a Conference on “Developed Village – Developed Nation” organized by AICTE, Delhi on October 28 – 29, 2017.

5. Participated in a panel discussion on “Quality of Instruction” organized by NITTTR, Chandigarh on November 16, 2016.

6. Attended a National Conference on Intellectual Property Rights (IPR) organized by PHD chamber of Commerce and Industry, Delhi on December 16-17, 2016.

7. Attended a workshop on “Experiments for Robotics Class” organized by Department of Mechanical & Industrial Engineering, IIT Roorkee on February 13, 2016

8. Attended one week workshop on “Climate Change, Disaster Management and sustainable Development” Conducted by NITTTR Chandigarh at DGI Greater Noida during January 11-15, 2016.

9. Participated in one week QIP on “Integrated Automation Technologies” at IIT Delhi during June 1-6, 2015.

10. Attended Two day ISTE e-Seminar on Steps 2 Research organized by Department of Computer Science, AmalJyothi College of Engineering, Kanjirappally, Kerla on 19 -20, September 2014.

11. Attended one week workshop on ‘Strategic Management of NSQF, Community Colleges & Skill Development Scheme’ by NITTTR Chandigarh at DGI Greater Noida, June 23 –27 2014.

12. Attended One Week ICT based Short Training on “Faculty Induction Program” conducted by NITTTR, Chandigarh, at DGI Greater Noida, January 13^th - 17^th, 2014

13. Delivered Lecture in FDP Program on “Strategies for Effective Teaching Learning” held in July 2013.

14. Participated in the 53^rd National Conference and Convention on “India as a Technology Hub” organized by Indian Institution of Industrial Engineering (IIIE) held at Scope Convention Centre, Scope Complex, Delhi on December 15 & 16, 2011.

15. Participated in Mission 10X Workshop conducted by Wipro in coordination with ISTE, during 27 September to 1October 2011.

16. Attended one day ISO certification programme on ISO awareness at DGI Greater Noida on July 21, 2009.

17. Attended a national seminar on Transformation of Energy Resources and Applications at DGI Greater Noida on July 18, 2009.

18. Attended two day workshop on “Pro- Engineer (Wildfire 2.0)” at Rolta India, New Delhi during July 22– 24, 2004

19. Attended Two week “Faculty Development Programme” Sponsored by DST, Govt. of India, at S.A.T.I. Vidisha (M.P.) during December 3 - 19, 2001

20. Attended a National seminar on “Two Wheelers of Tomorrow”, held at BN College of engineering, Pusad (M.S.) during January 29 -30, 1999.

21. Attended National level workshop on “Design of Machines and Mechanisms”, January 1998, held at BN college of engineering, Pusad (M.S.)

Was instrumental in setting up Virtual Lab Nodal center at Dronacharya Group of Institutions (DGI) Greater Noida for Virtual Lab Project- IIT Delhi, worked as nodal center coordinator at during the year 2016-2018.

Received funding from Council of Science & Technology CST–UP for three student projects in 2017.

Established DGI- BOSCH Joint Certification Center (JCC) at DGI Greater Noida in 2017 for skill development of students in:

i) Auto-Electricals

ii) Engine Management System

Received grant from DST for student driven projects under Innovation and Entrepreneurship Development Centre (IEDC) scheme (Rs. 65000 each for five student projects, January 2016).

Established Automation Lab in association with FESTO India at DGI Greater Noida for imparting training to students in the area of automation, January 2016.

Established Center of Excellence for Smart Manufacturing (CoESM) under the aegis of PPDC-Technology Development Center, Agra (Ministry of MSME) at DGI Greater Noida on August 17, 2016.

Established e-Yantra Robotics lab (IIT Bombay) at DGI for imparting training to students in the area of Embedded Systems and Robotics on January 16, 2015.

During my tenure as HOD Mechanical at DGI, Greater Noida the department has filed 6 patent applications on student driven projects in the year 2014 and 2015.

MOU signed with BOSCH India Pvt. Ltd. for internship of DGI students Received funding from IEEE for two student projects under IEEE-UPP mini project Scholarship, September 2015.

Received grant of Rs. 1, 40,000/- from AICTE for conducting Two Weeks Faculty Development Program on Introduction to Finite Element Analysis at DGI in May 2015.

Established Student Support Wing of Indian Industries Association (IIA) at DGI with a view to increase summer training and internship opportunities for students on February 14, 2014.

Office Address: School of Mechanical & Manufacturing Sciences, C building

Email: dvb.smms@jspmuni.ac.in

Phone: 9540969645

LinkedIn: https://www.linkedin.com/in/dattatraya-bhise-8847b9118/